Tilta Nucleus Nano N Wireless Follow Focus Mini Kit

The WLC T04 motor can only operate DSLR lenses and mirrorless. The WLC T04 motor cannot work with any Sigma lens and film lens.

The WLC T04 motor can only operate DSLR lenses and mirrorless. The WLC T04 motor cannot work with any Sigma lens and film lens. The WLC-T04 motor cannot operate the large lenses with large damping.
The nano handwheel controller has a compact rotating design, similar to professional follow focus hand units (the design is very similar to the focus wheel of the Tilta Nucleus-M hand unit). The nano handwheel controller has no delay. It is very responsive, wireless and precise. It is powered by a single 14500 rechargeable battery (included) and reaches a working time of 6 hours.
The Nucleus Nano uses a state-of-the-art performance miniature motor. The nano motor has a low noise and a high torque. It can perform super fast focusing with noiseless precision. The built-in 15 mm rod adapter allows flexibility and compatibility with a variety of camera rigs and professional mounting options.
The Nano motor has its own built-in motor drive, which communicates directly with the Nano hand wheel controller. This eliminates the need to mount a separate MDR on your rig, allowing a more compact camera setup and faster setup time. Simply set the nano motor and nano handwheel controller to the same channel and you have full control. The wireless range of the nano handwheel controller and the nano motor is 91 m
The nano motor allows automatic calibration of the lens as well as manual calibration when using lenses that do not have hard end connections in close focus and infinity, about the ability to set A-B limits on the nano handwheel controller. Each motor has a 0.8 mod, which is the standard gear size. ?e is for most cinema lenses. The torque of the Nucleus Nano motor at 5.5 V is 0.65 N and at 14.8 V is 1 N.

Contents:

1x Nucleus Nano hand wheel control

1x Nucleus-Nano Wireless Follow Focus Motor

1x 15mm Single Pole Mount Baseplate For 95mm lenses

2x 1/4"-20 Hex Head Screws

2x Pole Mount Hex Head Screw

1x 15mm x 100mm Black Aluminum Rod

1x 31cm 5V Micro USB Male to 5V Micro USB Male Motor Power Cable

2x The photographic lens follows the focus gears.

1x Nucleus Nano Handwheel Mounting Plate for Ronin-S/G2x

1x Nucleus Nano Handwheel Attachment Adapter Compatible with Crane 1

1x 14500 Dual Battery Wall Charger